Leviton S15-05603-2ES 3-way Decora Switch 15A 120/277V

Product Description

The LEVITON MFG CO S15-05603-2ES is a 3-way Decora-style rocker switch rated for 15 amps at 120/277 volts. It supports both Quickwire push-in termination and traditional side-wired screw terminals, allowing faster rough-in on new construction or retrofit work. Terminal screws accept up to No. 10 copper wire. The switch also carries motor load ratings of 1/2 HP at 120V and 2 HP at 240V, making it suitable for fan or motor-control circuits where a standard toggle is not specified. Electricians install this device in standard single-gang boxes where a 3-way switching configuration is required at stairways, hallways, or multi-entry rooms.

This switch is designed for residential and light commercial electrical installations where a Decora rocker finish is specified. It is appropriate for 15-amp branch circuits wired to NEC standards. The dual-wiring method — push-in and screw-terminal — suits contractors who need to move quickly through device rough-in without sacrificing a secure termination. It ships in a package quantity of 10 units, making it practical for multi-unit or whole-house installations.

Key Features

• Quickwire push-in and side-screw terminals for two installation methods on one device
• Terminal screws accept up to No. 10 copper wire
• Rated 15A at 120/277 volts for use on standard and dual-voltage branch circuits
• Motor load ratings: 1/2 HP at 120V and 2 HP at 240V
• Decora rocker style for compatibility with Decora-style wallplates
• UL listed
• Limited 10-year warranty

Compatibility

Designed as an OEM-style replacement or new-installation 3-way switch for residential and light commercial 15-amp branch circuits requiring a Decora rocker device in standard single-gang boxes.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the NEC and applicable local codes. De-energize the circuit at the breaker panel and verify zero voltage with a meter before removing or connecting any wiring. In a 3-way switching configuration, verify traveler and common terminals are correctly identified before terminating. Push-in Quickwire connections should be made with solid copper conductors only; use screw terminals when working with stranded wire.