Leviton Mfg Co S01-0BR20-0IS 20A Duplex Outlet Ivory 10-pack

Product Description

The LEVITON MFG CO S01-0BR20-0IS is a 20-amp commercial grade duplex receptacle in ivory finish, designed for demanding wiring environments where conductivity, durability, and installation speed matter. The shallow body profile maximizes available wiring room inside the box, a practical advantage when working in crowded retrofit boxes. Side wiring is supported via large-head terminal screws and back-wiring clamps that accept wire up to No. 10 copper. Triple wire power contacts deliver strong conductivity and positive plug retention over repeated cycles. A heavy-gauge, rust-resistant steel mounting strap adds long-term structural integrity. This receptacle ships in a package quantity of 10 units.

This receptacle is suited for commercial and light industrial applications where code-compliant, high-cycle outlets are required. The shallow design makes it a practical choice for remodel work in older boxes with limited depth. Break-off tabs allow straightforward conversion to a 2-circuit configuration when the installation calls for split-circuit wiring. Licensed electricians typically specify commercial grade receptacles like this one in office spaces, retail environments, schools, and similar facilities that require UL listed devices rated for continuous 20-amp service.

Key Features

• Shallow design maximizes wiring room inside the electrical box
• Side wired with large-head terminal screws and back-wiring clamps accepting up to No. 10 copper wire
• Triple wire power contacts for enhanced conductivity and plug retention
• Captive mounting screws speed up installation and prevent hardware loss
• Washer-type break-off plaster ears allow flush wall alignment
• Break-off tabs enable easy 2-circuit conversion for split-circuit wiring
• Heavy-gauge rust-resistant steel mounting strap for long-term durability

Compatibility

Designed as a commercial grade 20-amp duplex receptacle for use in standard single-gang electrical boxes in commercial and light industrial wiring applications.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Always shut off power at the circuit breaker and verify the circuit is de-energized with a voltage tester before handling wiring connections. Confirm the box size and depth are compatible with the receptacle before securing the device. Tighten terminal screws to the torque specification printed on the device or listed in the manufacturer documentation.