Leviton Mfg Co RS0-LP322-LDR Indoor Load Center 30 Space

Product Description

The LEVITON MFG CO RS0-LP322-LDR is a 30-space indoor load center designed for residential and light commercial electrical distribution applications. It ships with factory-installed main lugs, eliminating the need for a separate main breaker and making it well-suited for use as a sub-panel fed from an upstream disconnect. Rated NEMA 1, this unit is built for dry, indoor environments. A solid door is included. At 42.21 pounds, the enclosure is a substantial steel assembly intended for permanent wall-mount installation by a licensed electrician.

This load center is used in residential new construction, remodel projects, and light commercial builds where a sub-panel or branch-circuit distribution panel is required indoors. The 30-space configuration provides capacity for a high number of single-pole or tandem branch circuits. The main lug design requires the installer to feed the panel from a separately installed disconnect or upstream main breaker, which is standard practice for sub-panel applications. Licensed electricians and electrical contractors are the primary installers of this type of equipment.

Key Features

• 30 spaces for single-pole or tandem branch circuit breakers
• Factory-installed main lugs for sub-panel or feed-through configurations
• NEMA 1 rating for dry indoor installations
• Solid door included for enclosure protection and code compliance
• Substantial 42.21-pound steel construction for permanent wall mounting

Compatibility

Designed as an OEM-style indoor load center for use as a sub-panel in residential or light commercial electrical distribution systems where a NEMA 1 enclosure is required.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. De-energize the upstream feed before making any connections to the main lugs. Because this panel uses main lugs rather than a main breaker, a listed disconnect or upstream overcurrent device must be installed per NEC requirements. Verify the enclosure mounting surface is plumb and capable of supporting the panel weight before securing.