Leviton Mfg Co R62-0CSB4-2WS 4-way Switch 20A 120/277V

Product Description

The LEVITON MFG CO R62-0CSB4-2WS is a commercial-grade 4-way electrical switch rated for 20 amps at 120/277 volts AC. It supports both back and side wiring configurations, giving electricians flexibility during rough-in and trim-out in a variety of commercial and institutional settings. The white finish suits standard commercial wallplate installations. This switch is built to commercial-grade specifications, making it appropriate for higher-demand switching applications where residential-grade devices would be undersized or non-compliant.

This 4-way switch is used in multi-location lighting control circuits where three or more switching points are required. Typical installations include corridors, large rooms, stairwells, and commercial spaces wired under NFPA 70 (NEC) requirements. The 120/277-volt rating makes it suitable for both standard residential-voltage branch circuits and the 277-volt single-phase lighting circuits common in commercial construction. It is sold in a package quantity of 6 units, making it practical for multi-device rough-in projects.

Key Features

• 20-amp rating supports commercial-grade branch circuit loads
• Dual voltage rating: 120/277 volts AC for residential and commercial lighting circuits
• 4-way switching function enables multi-location control with three or more switch locations
• Back and side wiring options provide installation flexibility
• White finish for compatibility with standard commercial wallplates
• Package quantity of 6 units per pack

Compatibility

Designed as a commercial-grade 4-way switch replacement or new installation device for NEC-compliant multi-location lighting control circuits operating at 120 or 277 volts AC.

Installation Notes

Installation must be performed by a licensed electrician in accordance with NFPA 70 (NEC) and applicable local codes. De-energize the branch circuit at the panel and verify with a non-contact voltage tester before beginning any wiring work. This device must be used in conjunction with two 3-way switches at the end locations of any multi-location circuit. Back and side terminals should not be used simultaneously on the same pole.