Leviton Mfg Co R22-AGTR1-0KW Afci Gfci Outlet White 3 Pack

Product Description

The LEVITON MFG CO R22-AGTR1-0KW is a dual-function AFCI/GFCI tamper-resistant outlet designed for residential electrical installations. It combines arc fault circuit interrupter (AFCI) and ground fault circuit interrupter (GFCI) protection in a single device, cutting power quickly when an arc fault or ground fault is detected. This reduces the risk of electrical fire and shock at a single point of protection. The outlet ships in a 3-pack and is finished in white with a monochromatic test and reset button. Licensed electricians install this device as part of NEC-compliant branch circuit wiring.

This outlet is rated for residential use and is specifically cited as a NEC-compliant solution for kitchens and laundry areas where both AFCI and GFCI protection may be required at the same location. It also serves as a code-acceptable replacement for older ungrounded receptacles where upgrading the wiring is not practical. The tamper-resistant shutter mechanism adds a layer of safety in locations accessible to children. Each unit includes mounting screws, washers, and an instruction sheet, making it suitable for straightforward swap-out or new-construction rough-in work.

Key Features

• Dual AFCI and GFCI protection in a single outlet device
• Tamper-resistant shutter design for added safety
• NEC-compliant for residential kitchens and laundry areas
• Suitable replacement for ungrounded receptacles
• Monochromatic test and reset button included
• Includes mounting screws, washers, and instruction sheet

Compatibility

Designed as an OEM-style replacement or new-installation outlet for residential branch circuits requiring combined AFCI and GFCI protection per NEC requirements.

Installation Notes

Installation must be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Turn off the branch circuit breaker and verify power is absent at the outlet box with a non-contact voltage tester before beginning work. Do not install this device on circuits where the wiring configuration is incompatible with AFCI/GFCI combination devices. After installation, press the test and reset buttons to confirm proper operation before closing the wall plate.