Leviton Mfg Co 012-05410-000 Feed-through Cord Switch 3A 125V

Product Description

The LEVITON MFG CO 012-05410-000 is a heavy-duty, single-pole toggle rocker On/Off feed-through cord switch built for reliable inline switching on cord-connected equipment. Constructed from phenolic plastic with bronze double-wire contacts, it delivers durable performance in demanding environments. Rated at 3 amps and 125 volts, with a motor rating of 1/2 HP at 125 volts, this switch handles both resistive and motor loads. End holes accept 0.25-inch diameter cord. The brown finish suits standard cord and fixture applications. Electricians and maintenance technicians install this switch where an inline control point is needed on a power cord without cutting or splicing the cord itself.

This feed-through cord switch is suited for residential and light commercial applications including lamps, fans, small appliances, and other cord-connected devices operating on 125-volt circuits. The single-pole toggle rocker design provides a clear On/Off indication, making it appropriate for any installation where a simple, accessible cord-mounted control is required. It is sold in a package quantity of 10 units, making it practical for service stock or multi-unit installations.

Key Features

• Heavy-duty phenolic plastic housing for durability in cord switch applications
• Bronze double-wire contacts for reliable electrical connection
• Rated 3A at 125V and 1/2 HP at 125V for resistive and motor loads
• End holes sized for 0.25-inch diameter cord
• Single-pole toggle rocker provides clear On/Off switching
• UL listed for safe use in standard 125-volt cord applications

Compatibility

Designed as an OEM-style replacement or service part for cord-connected lamps, fans, and small appliances requiring an inline single-pole On/Off switch on 0.25-inch diameter cord at 125 volts.

Installation Notes

Installation is performed by a licensed electrician or qualified maintenance technician following NEC guidelines for cord-connected equipment. Always disconnect the cord from its power source before installing or replacing the switch. Route the cord through the end holes and secure the double-wire contacts per the switch body design. Do not exceed the rated 3A or 1/2 HP load limits for the circuit.