Leviton AGTR1-GY Gfci Receptacle Commercial Grade 5-15R

Product Description

The LEVITON AGTR1-GY is a commercial-grade GFCI receptacle designed to provide ground fault circuit interruption protection in standard 15-amp, 125-volt branch circuits. Configured to NEMA 5-15R, it accepts standard two-pole, three-wire plugs and delivers code-required shock protection in wet, damp, or high-risk locations. The manual reset type requires deliberate user action to restore power after a fault trip, which is standard practice in commercial installations. This receptacle is installed by licensed electricians during new construction, renovation, or code-compliance retrofits.

This receptacle is suited for commercial applications where GFCI protection is required by the National Electrical Code, including bathrooms, kitchens, garages, outdoor locations, and areas near water sources. Its back and side wiring method supports both traditional screw-terminal connections and through-wiring configurations, making it adaptable to a range of rough-in conditions. Single-phase, three-wire wiring is standard for this device class.

Key Features

• Commercial-grade construction rated for demanding installation environments
• NEMA 5-15R configuration accepts standard 15-amp two-pole three-wire plugs
• Manual reset operation requires intentional reset after a ground fault trip
• Back and side wiring method supports screw-terminal and feed-through wiring
• Single-phase, two-pole, three-wire design for standard 125-volt branch circuits
• CSA Certified to applicable safety standards

Compatibility

Designed as an OEM-style replacement or new-installation GFCI receptacle for commercial single-phase branch circuits using NEMA 5-15R wiring configurations.

Installation Notes

Installation must be performed by a qualified electrician in accordance with the National Electrical Code (NEC) and applicable local codes. De-energize the circuit at the breaker panel and verify with a non-contact voltage tester before wiring. Follow the device's labeled LINE and LOAD terminals precisely to ensure downstream GFCI protection functions correctly. Test the reset and trip functions after installation to confirm proper operation before closing the wall box.