Leviton AGTR1-E Gfci Receptacle 15A 125V Commercial Grade

Product Description

The LEVITON AGTR1-E is a commercial-grade GFCI receptacle designed to provide ground-fault circuit interruption protection in both residential and commercial electrical installations. Rated for single-phase, 3-wire, 2-pole service with a NEMA 5-15R configuration, this device delivers 15-amp, 125-volt protection at the outlet level. It features a manual reset mechanism and supports both back-wire and side-wire termination methods, giving electricians flexibility during rough-in and finish work. The AGTR1-E is CSA certified and is a direct-install replacement unit suited for licensed electricians performing code-compliant installations in wet or damp location circuits.

This GFCI receptacle is intended for commercial electrical applications where NEC Article 210.8 requires ground-fault protection, including bathrooms, kitchens, garages, outdoor outlets, and unfinished basements. Its manual reset operation means the device must be physically reset at the outlet face after a fault trip, making it straightforward to test and restore. The dual wiring method — back-wire and side-wire — accommodates standard residential wiring practices as well as commercial conduit installations where side-terminal connections are preferred.

Key Features

• NEMA 5-15R configuration for standard 15-amp, 125-volt receptacle applications
• Manual reset operation for simple on-site fault reset and testing
• Back-wire and side-wire termination support for installation flexibility
• Commercial grade construction for demanding installation environments
• Single-phase, 2-pole, 3-wire design for standard branch circuit use
• CSA certified to meet North American safety standards

Compatibility

Designed as an OEM-style replacement GFCI receptacle for commercial and residential branch circuits requiring NEMA 5-15R ground-fault protection at the outlet.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and applicable local codes. Always de-energize the circuit at the breaker panel and verify with a non-contact voltage tester before handling any wiring. Ensure the load and line terminals are correctly identified and connected — reversing line and load wiring will prevent proper GFCI operation. Test the reset and trip functions after installation using the built-in test and reset buttons before returning the circuit to service.