Leviton 5306M-1S5 Surge Outlet Strip 6-outlet Hospital

Product Description

The LEVITON 5306M-1S5 is a hospital-grade surge power outlet strip rated at 15 amps and 125 volts AC. It provides six outlets along a steel strip body and is designed for wall or surface mounting in demanding environments where equipment protection and code compliance are required. The strip carries a UL 60601-1 listing, making it suitable for healthcare facilities and medical equipment installations. A built-in surge protection circuit guards connected devices against voltage spikes, and the manual trip reset allows quick restoration after an overload event. The 15-foot cord provides flexible placement from the power source to the installation point.

This outlet strip is intended for hospital and healthcare environments where UL 60601-1 compliance is required, though it also suits other commercial and institutional settings that demand surge-protected, wall-mounted power distribution. The NEMA 5-20 configuration accommodates standard 20-amp rated plugs as well as 15-amp plugs. Licensed electricians typically handle installation in medical or commercial facilities to meet applicable electrical codes. The white steel enclosure and wall-mount design keep the strip secure and out of the way in patient rooms, procedure areas, or equipment rooms.

Key Features

• Six outlets on a single strip for centralized power distribution
• Surge protection with manual trip reset for overload recovery
• UL 60601-1 listed for hospital and healthcare grade installations
• NEMA 5-20 configuration accepts both 15-amp and 20-amp plugs
• 15-foot power cord for flexible placement relative to the power source
• Steel construction with white finish for durable wall or surface mounting

Compatibility

Designed for wall or surface mount installation in hospital and healthcare environments requiring UL 60601-1 listed surge-protected outlet strips with a NEMA 5-20 configuration.

Installation Notes

Installation in medical facilities should be performed by a licensed electrician in accordance with NFPA 99 and applicable NEC requirements for healthcare facilities. De-energize the circuit at the breaker panel before making any connections. Verify that the branch circuit amperage and NEMA receptacle configuration match the strip ratings before mounting. Secure the strip to the wall surface using appropriate fasteners rated for the mounting substrate.