Leviton 06672-1LW Sureslide Dimmer 150W Led 600V Incandescent

Product Description

The LEVITON 06672-1LW is a single-pole slide dimmer switch rated for 120 volts, designed to control dimmable LED loads up to 150 watts or incandescent and halogen loads up to 600 watts. The slide actuator provides smooth, continuous dimming adjustment across the full range of supported load types. This switch installs in a standard single-gang wall box and is finished in white to match common residential and light-commercial decor plates. Licensed electricians and knowledgeable DIYers handle installation in compliance with local NEC requirements.

The 06672-1LW is suited for residential and light-commercial lighting circuits where a single control point manages one lighting load. Typical applications include living rooms, bedrooms, hallways, and dining areas using dimmable LED, incandescent, halogen, or dimmable CFL fixtures. The single-pole configuration means it controls a load from one switch location only; three-way or multi-location dimming requires a different wiring arrangement and a compatible accessory switch.

Key Features

• Slide-style actuator for smooth, continuous dimming across the full load range
• Dual load rating: 150 watts for dimmable LED and dimmable CFL; 600 watts for incandescent and halogen
• Single-pole, 120-volt configuration for standard residential branch circuits
• Compatible with dimmable LED, dimmable CFL, incandescent, and halogen sources
• White finish suits standard decorator-style wall plates

Compatibility

Designed for single-pole dimming applications with dimmable LED, dimmable CFL, incandescent, and halogen light sources on 120-volt residential or light-commercial circuits.

Installation Notes

Installation should be performed by a licensed electrician or qualified individual in accordance with NEC Article 404 and all applicable local codes. De-energize the circuit at the breaker panel and verify the absence of voltage with a meter before handling any wiring. This is a single-pole device and requires a neutral wire in the box depending on local code; verify box wiring before ordering. Do not use with motor loads, low-voltage magnetic transformers, or non-dimmable LED or CFL sources.