Leviton 06672-1LI Sureslide Dimmer Switch 1-pole 120V Ivory

Product Description

The LEVITON 06672-1LI is a single-pole slide dimmer switch rated for 120 volts AC and designed to control fluorescent, incandescent, and LED lighting loads. It delivers full continuous dimming through a slide-style control with a combined slide on/off function, allowing smooth adjustment across the full brightness range. At 120V AC, the switch handles up to 150 watts for CFL and LED sources and up to 600 watts for incandescent loads. No neutral wire is required, simplifying installation in standard single-pole switching applications. The illuminated slider makes the switch easy to locate in low-light conditions. Part of the SureSlide series, this dimmer is suited for residential and light commercial wiring projects handled by licensed electricians.

The 06672-1LI fits single-gang wallbox installations on standard 120V AC branch circuits running at 60 Hz. It is appropriate for retrofitting existing incandescent switch locations with a dimmer capable of also driving CFL and LED fixtures within its rated load. The switch covers a single pole only and is not rated for three-way or multi-location dimming configurations. A wall plate is not included and must be sourced separately to match the ivory finish. This dimmer is suited for bedrooms, living areas, hallways, and similar residential spaces where slide-style dimming is preferred.

Key Features

• Full continuous dimming with slide control and integrated slide on/off function
• Compatible with fluorescent, incandescent, and LED lighting technologies
• 150W load rating for CFL and LED loads at 120V AC
• 600W load rating for incandescent loads at 120V AC
• No neutral wire required for standard single-pole installation
• Illuminated slider for low-light visibility
• RoHS compliant and UL Listed / CSA Certified

Compatibility

Designed as a single-pole dimmer replacement for standard 120V AC residential and light commercial wiring applications supporting fluorescent, incandescent, and LED lamp types within the rated load limits.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the National Electrical Code (NEC) and all applicable local codes. Turn off the circuit breaker controlling the circuit before removing the existing switch or making any wire connections. Verify that the combined connected load does not exceed the dimmer rating for the lamp type being controlled. A compatible single-gang wall plate must be installed separately to complete the assembly.