Lenox 97891QPB144420 Bandsaw Blade 14.5 Ft 4-6 Tpi Bi-metal

Product Description

The LENOX 97891QPB144420 is a welded bi-metal bandsaw blade designed for continuous cutting of a wide range of ferrous and non-ferrous metals on stationary bandsaw equipment. The blade measures 14 feet 6 inches in length, 1 inch in width, and 0.035 inches thick, with a variable pitch of 4 to 6 teeth per inch. The tooth material is M42+ high speed steel, which handles heat and wear better than standard high speed steel grades. A positive rake angle and vari-raker tooth set improve chip evacuation and reduce cutting forces during production use. Licensed HVAC, metal fabrication, and maintenance technicians working with structural steel, stainless, titanium, or aluminum stock will find this blade suited to demanding production applications.

This blade is intended for use on stationary vertical or horizontal band saws with a wheel diameter and blade path compatible with a 14-foot 6-inch blade length. The variable pitch tooth form reduces vibration and harmonic resonance when cutting interrupted cuts, thin-wall tubing, and solid bar stock. Material applications include alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, other non-ferrous metals, and titanium. It is part of the LENOX QXP series, which is engineered for high-production cutting environments where blade life and cut quality are priorities.

Key Features

• Bi-metal construction with M42+ high speed steel teeth bonded to a spring steel back for flexibility and tooth durability
• Variable pitch of 4 to 6 TPI with vari-raker tooth set to reduce vibration and improve chip clearance
• Positive rake angle increases cutting aggression and reduces required feed force
• Kerf width of 0.058 inches minimizes material loss per cut
• Suitable for alloy steel, stainless steel, titanium, aluminum, carbon steel, tool steel, mold steel, and bearing steel
• Welded blade construction for consistent tension and tracking on bandsaw equipment

Compatibility

Designed for use on stationary bandsaws that accept a blade measuring 14 feet 6 inches in length, 1 inch in width, and 0.035 inches thick. Confirm wheel spacing, blade guides, and blade tensioner capacity on the host machine before installation.

Installation Notes

Bandsaw blade installation should be performed by a qualified technician familiar with the specific saw model. Power down and lockout the bandsaw before removing the old blade or mounting the new one. Wear cut-resistant gloves when handling the blade, as tooth edges are sharp along the full length. Verify blade tension, tracking, and guide bearing clearance according to the saw manufacturer's service documentation before resuming operation.