Lenox 95936QPB154775 Bandsaw Blade 188in 3-4 Tpi Bi-metal

Product Description

The LENOX 95936QPB154775 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shop and industrial environments. It measures 188 inches (15 feet 8 inches) in length and 1-1/4 inches in width with a blade thickness of 0.042 inches. The tooth material is M42+ high speed steel, ground to a variable pitch pattern at 3 to 4 TPI with a positive rake angle and single level set. The spring steel back provides fatigue resistance during continuous cutting cycles. This blade is part of the LENOX QXP series and is intended for installation by machinists, fabricators, and maintenance professionals operating vertical or horizontal band saws.

This blade is suited for cutting a wide range of materials including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. The variable pitch tooth form reduces harmonics and vibration during the cut, making it well-suited for structural shapes, solid bar stock, and bundled sections. It is appropriate for both production shops and job-site fabrication where consistent, accurate contour-free cuts are required on a variety of material profiles.

Key Features

• M42+ high speed steel teeth with ground tooth form for clean, accurate cuts across hard materials
• Variable pitch at 3 to 4 TPI reduces vibration and noise during cutting
• Positive rake angle improves chip clearance and cutting aggression on dense metals
• Spring steel back provides flexibility and resistance to fatigue cracking over extended use
• Single level tooth set delivers consistent kerf width of 0.0700 inches
• QXP series construction supports cutting of titanium, stainless steel, and tool steel

Compatibility

Designed as a welded-loop replacement blade for vertical and horizontal band saws accepting a 1-1/4 inch wide blade at 188 inches (15 feet 8 inches) in length. Verify your machine's wheel diameter and blade length specification before installation.

Installation Notes

Blade installation should be performed by a qualified machinist or fabricator with experience in band saw maintenance. Disconnect and lock out power to the saw before removing the old blade or installing a new one, following OSHA lockout/tagout procedures. Use proper blade-handling gloves when coiling or uncoiling the welded loop, as the tooth edge presents a laceration hazard. After installation, confirm blade tension, tracking alignment, and guide bearing clearances before resuming operation.