Lenox 95614QPB195840 Bandsaw Blade 19 Ft 2 in 3-4 Tpi

Product Description

The LENOX 95614QPB195840 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in industrial and shop environments. It runs 19 feet 2 inches in length and 1-1/2 inches wide, with a blade thickness of 0.05 inches and a kerf width of 0.082 inches. The variable-pitch tooth form spans 3 to 4 TPI, reducing harmonic vibration and chatter during cuts through thick or variable cross-section stock. The high-speed steel teeth are ground to a positive rake angle and set at a single-level configuration. The M42 Plus material grade designates a cobalt-enriched high-speed steel tooth, suited for abrasive and hard materials. Installation and use are appropriate for licensed machinists and skilled trades operating vertical or horizontal band saws.

This blade is designed for cutting a wide range of metallic materials, including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. The QXP series construction combines a spring steel back with M42 Plus HSS teeth, making this blade a practical choice for production shops and maintenance facilities that cut structurally varied stock. It is not configured for contour cutting. The variable pitch pattern distributes cutting load evenly, extending blade life on long cuts and interrupted feeds. Typical applications include structural steel fabrication shops, machine shops, and toolrooms.

Key Features

• Bi-metal construction with M42 Plus high-speed steel teeth for extended cutting life on hard and abrasive materials
• Variable pitch tooth form at 3 to 4 TPI reduces vibration and chatter on varied cross-section workpieces
• Ground, single-level set teeth with positive rake angle for clean, efficient cuts
• Spring steel back provides flexibility and fatigue resistance over continuous band saw operation
• 0.082-inch kerf width minimizes material waste per cut
• Rated for alloy steel, stainless steel, titanium, aluminum, and multiple non-ferrous metals

Compatibility

Designed as a direct-fit welded replacement blade for band saws accepting a 19-foot 2-inch loop length and 1-1/2-inch blade width. Verify your saw's wheel diameter, blade guide clearance, and tension range before installation.

Installation Notes

Blade installation should be performed by a qualified machinist or maintenance technician familiar with band saw equipment. Power down and lock out the machine before removing or fitting any blade. Confirm proper blade tension per the saw manufacturer's specification and verify tracking alignment before running under load. Wear cut-resistant gloves when handling uncoiled or welded bandsaw blades.