Lenox 95415QPB195790 Bandsaw Blade 19 Ft 2 in 2-3 Tpi

Product Description

The LENOX 95415QPB195790 is a welded bi-metal bandsaw blade built for demanding metal-cutting applications in professional fabrication and machine shop environments. Measuring 19 feet long and 2 inches wide with a 0.063-inch thickness, this blade runs a variable 2 to 3 TPI pitch pattern designed to reduce vibration and harmonic chatter during the cut. The M42-plus high speed steel tooth material delivers extended edge life on tough materials. The QXP series ground tooth form and positive rake angle promote aggressive, efficient stock removal. Installed by machinists and metal fabricators on horizontal and vertical band saws, this blade is a direct fit where a 19-foot blade length is required.

This blade is suited for cutting a wide range of metals in production and job-shop settings, including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. The variable pitch tooth pattern makes it especially effective on interrupted cuts and varying cross-sections where a fixed-pitch blade would generate excessive vibration. It is not designed for contour cutting applications. Typical installations include horizontal band saws used for structural bar, billet, and tube stock cutoff work.

Key Features

• Bi-metal construction with M42-plus high speed steel teeth for extended cutting life on hard and abrasive metals
• Variable 2 to 3 TPI pitch reduces vibration and prevents tooth strippage on varying cross-sections
• Ground, positive-rake tooth form promotes fast, clean stock removal
• Single level tooth set with 0.095-inch kerf width for consistent, repeatable cuts
• Spring steel back provides flexibility and fatigue resistance over long run times
• Welded blade construction in QXP series for reliable joint integrity under continuous use

Compatibility

Designed as an OEM-style replacement or upgrade blade for horizontal and vertical band saws that accept a 19-foot blade length with a 2-inch blade width. Verify blade tension, wheel diameter, and guide specifications against your saw manufacturer requirements before installation.

Installation Notes

Blade installation should be performed by a qualified machinist or maintenance technician familiar with band saw setup procedures. Disconnect and lock out power to the saw before handling or mounting the blade. Follow the saw manufacturer guidelines for blade tension, tracking adjustment, and guide bearing clearance. Wear cut-resistant gloves when handling uncoiled bandsaw blades, as the edges present a laceration hazard.