Lenox 95264QPB123735 Welded Bandsaw Blade 3-4 Tpi

Product Description

The LENOX 95264QPB123735 is a welded bi-metal bandsaw blade built for demanding metal-cutting applications in production and job-site environments. Measuring 12 feet 3 inches in length and 1 inch wide with a 0.035-inch thickness, this blade fits a range of horizontal and vertical band saws used in fabrication and machine shops. The variable pitch tooth form at 3 to 4 TPI helps reduce harmonic vibration and chatter during cuts, improving blade life and cut quality on thicker cross-sections. The M42+ high speed steel tooth material delivers hardness and heat resistance suited for abrasive and hard alloys. Licensed HVAC, mechanical, and metal fabrication technicians are the primary installers and end users.

This blade is designed for cutting a broad range of materials including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. It is well suited to contour-free straight-cut applications in industrial and commercial fabrication settings. The 3 to 4 TPI variable pitch configuration makes it particularly effective on medium to heavy cross-section stock where constant-pitch blades tend to load up or vibrate excessively.

Key Features

• Bi-metal construction with M42+ high speed steel teeth bonded to a spring steel back for flexibility and edge retention
• Variable pitch tooth form at 3 to 4 TPI reduces vibration and extends blade life on heavy stock
• Single level set with positive rake angle improves chip clearance and cutting efficiency
• Ground, toothed, variable cutting edge style for consistent kerf and surface finish
• Kerf width of 0.0600 inches supports dimensional accuracy on critical cuts
• QXP series construction engineered for high-production metal-cutting environments

Compatibility

Designed as a direct-fit welded replacement blade for band saws accepting a 1-inch wide blade in the 12-foot 3-inch loop length. Suitable for cutting alloy steel, aluminum, non-ferrous metal, carbon steel, stainless steel, tool steel, mold steel, bearing steel, and titanium.

Installation Notes

Blade installation should be performed by a qualified technician following the band saw manufacturer's blade-change procedure. Always disconnect and lock out power to the saw before removing or installing a blade. Verify blade tension, tracking, and guide bearing clearance after installation and before resuming cuts. Wear cut-resistant gloves when handling coiled or uncoiled bandsaw blades.