Lenox 94333QPB195840 Welded Bandsaw Blade 2-3 Tpi

Product Description

The LENOX 94333QPB195840 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in industrial and fabrication environments. Measuring 230 inches in length and 1-1/2 inches in width with a 0.05-inch thickness, this blade features a variable-pitch tooth form at 2 to 3 TPI for efficient chip clearance and reduced vibration during cuts. The tooth material is M42+ high speed steel with a positive rake angle and single-level set, delivering aggressive cutting action on a wide range of metals. Licensed millwrights, maintenance machinists, and metal fabricators rely on blades in this class for high-cycle production cutting.

This blade is suited for vertical and horizontal bandsaw machines configured to accept a 230-inch loop. The variable pitch pattern minimizes harmonic vibration, making it effective on both solid bar stock and structural shapes. Compatible material applications include alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, non-ferrous metals, and titanium. The QXP series designation indicates it is positioned for challenging, hard-to-cut materials where blade longevity is a priority.

Key Features

• Bi-metal construction with M42+ high speed steel teeth bonded to a spring steel back for flex resistance
• Variable pitch at 2 to 3 TPI reduces vibration and improves surface finish on irregular cross-sections
• Positive tooth rake angle promotes aggressive, efficient stock removal
• Single-level tooth set produces a 0.082-inch kerf width for consistent cut control
• Ground, toothed, variable cutting edge style for precision and long service life
• Rated for a broad material range including titanium, stainless steel, and mold steel

Compatibility

Designed as a replacement or stock blade for bandsaw machines that accept a 230-inch welded loop, 1-1/2 inches wide. Verify your saw's wheel diameter, blade guide spacing, and maximum blade width specification before installation.

Installation Notes

Bandsaw blade changes should be performed by qualified maintenance personnel or machine operators following the saw manufacturer's lockout/tagout procedure before opening the blade housing. Wear cut-resistant gloves when handling and coiling the blade. Confirm proper blade tension using the saw's built-in tension gauge or a calibrated tensioning tool before energizing the machine. Allow a short break-in period at reduced feed rate on initial use to seat the tooth set properly.