Lenox 94330QPB123810 Bandsaw Blade 150 in 4-6 Tpi Bi-metal

Product Description

The LENOX 94330QPB123810 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in production and fabrication environments. The blade measures 12 feet 6 inches (150 inches) in total length and 1-1/4 inches in width, with a 0.042-inch back thickness and a variable pitch of 4 to 6 TPI. The M42-plus high speed steel tooth material delivers extended edge life when cutting hard alloys, stainless steel, and titanium. A positive rake angle and Vari-Raker tooth set reduce cutting forces and improve chip evacuation. This blade belongs to the QXP series and is sold as a single welded loop ready to mount.

This blade is suited for vertical or horizontal metal-cutting bandsaws used in metal fabrication shops, tool rooms, and maintenance facilities. The variable pitch design reduces harmonic vibration and chatter when transitioning between solid stock and structural profiles. It handles a broad material range including alloy steel, carbon steel, stainless steel, tool steel, mold steel, bearing steel, aluminum, other non-ferrous metals, and titanium. It is typically installed by machinists, fabricators, or millwrights on industrial bandsaw equipment requiring a 12-foot 6-inch blade loop.

Key Features

• Bi-metal construction with M42-plus high speed steel teeth bonded to a spring steel back for flex resistance
• Variable 4 to 6 TPI pitch with Vari-Raker tooth set minimizes vibration and extends blade life across varied cross-sections
• Positive tooth rake angle improves cutting aggression and reduces feed force on dense metals
• 0.0680-inch kerf width provides a clean, controlled cut with minimal material loss
• Welded loop construction ships ready to install with no field welding required
• Compatible material range includes titanium, stainless steel, tool steel, aluminum, and carbon steel

Compatibility

Designed for industrial metal-cutting bandsaws that accept a 12-foot 6-inch blade loop with a 1-1/4-inch blade width. Verify your machine's wheel diameter, blade guide spacing, and maximum blade width specification before installation.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician with the bandsaw fully de-energized and locked out per OSHA lockout/tagout procedures. Confirm blade tension using the saw manufacturer's tension chart for the specific blade width and thickness before operating. Inspect blade guides, thrust bearings, and wheel tires for wear prior to mounting a new blade. Do not exceed the blade speed rating recommended by the saw manufacturer for the material being cut.