Lenox 93733RPB144420 Bandsaw Blade 14ft 6in 5-8 Tpi Bi-metal

Product Description

The LENOX 93733RPB144420 is a welded bi-metal bandsaw blade designed for demanding metal-cutting operations in professional shop and fabrication environments. Measuring 14 feet 6 inches in length and 1-1/4 inches wide with a 0.042-inch body thickness, this blade is built for horizontal and vertical bandsaws used in structural steel, pipe, and solid bar cutting. The M42 high-speed steel tooth tips deliver heat and wear resistance under continuous production loads. A variable pitch of 5 to 8 TPI and Vari-Raker tooth set reduce vibration, minimize chatter, and extend blade life across varying workpiece cross-sections. This is a stock replacement format for shops running production cutting cycles.

This blade is intended for professional metal-cutting bandsaws requiring a 14-foot 6-inch loop length. It suits horizontal band saws used in industrial, commercial, and heavy-duty fabrication settings where consistent, chip-free cuts in ferrous and non-ferrous metals are required. The variable pitch design makes it effective across a range of material diameters and cross-sections without blade swapping. Licensed machinists, pipefitters, and fabrication shop technicians are the primary installers and operators of this blade.

Key Features

• M42 high-speed steel tooth tips for extended cutting life in hard and abrasive metals
• Variable 5 to 8 TPI pitch reduces vibration and chatter across varying cross-sections
• Vari-Raker tooth set promotes efficient chip evacuation and smooth cut surface finish
• Spring steel back for fatigue resistance under continuous flex cycling
• Positive rake angle improves cutting aggressiveness on structural and solid stock
• Welded construction provides a reliable, consistent loop with no mechanical joint

Compatibility

Designed for professional metal-cutting bandsaws that accept a 14-foot 6-inch bi-metal blade with a 1-1/4-inch width. Verify your machine's blade length specification and blade guide clearance before installation.

Installation Notes

Blade installation should be performed by a qualified machinist or trained shop technician. Disconnect and lock out power to the bandsaw before removing the old blade or installing the new one. Confirm proper blade tension according to the saw manufacturer's specifications and verify blade tracking before resuming cuts. Always wear cut-resistant gloves when handling bandsaw blades.