Lenox 93703RPB144470 Bandsaw Blade 14 Ft 8 in 5-8 Tpi

Product Description

The LENOX 93703RPB144470 is a welded bi-metal bandsaw blade engineered for demanding cutting applications in metal fabrication and industrial trades. At 176 inches in total length and 0.75 inches wide, this blade runs on standard vertical bandsaws and delivers a variable pitch of 5 to 8 TPI, reducing harmonics and vibration during cuts. The bi-metal construction pairs a spring steel back with M42 high speed steel teeth, giving the blade both flexibility and edge retention under continuous use. A Vari-Raker tooth set and positive rake angle combine to improve chip evacuation and extend blade life across a range of material thicknesses.

This blade is suited for professional metal cutting in fabrication shops, maintenance facilities, and industrial service environments. The RX Plus series targets applications involving ferrous metals, structural steel, and similar materials where a variable-pitch bi-metal blade is the standard of practice. At 0.035 inches thick with a kerf width of 0.058 inches, it provides efficient material removal with minimal waste. Metalworking tradespeople, millwrights, and industrial maintenance techs are the primary installers and operators.

Key Features

• Bi-metal construction with M42 high speed steel teeth for durability in metal cutting
• Variable pitch (5 to 8 TPI) reduces vibration and noise during operation
• Vari-Raker tooth set with positive rake angle improves chip clearance
• Spring steel back provides blade flexibility and resistance to fatigue cracking
• Welded construction for a continuous, balanced loop with no joint variation
• 0.058-inch kerf width minimizes material loss per cut

Compatibility

Designed as an OEM-style replacement welded bandsaw blade for vertical bandsaws accepting a 176-inch blade loop in 0.75-inch width.

Installation Notes

Installation should be performed by a qualified metalworking technician or trade professional familiar with bandsaw blade changes. Disconnect power to the bandsaw completely before opening the blade guards or removing the existing blade. Verify wheel diameter, blade tension range, and guide clearances on the saw match the 0.75-inch blade width before installing. Follow the saw manufacturer torque and tension specifications when setting blade tension after installation.