Lenox 93663RPB92970 Bandsaw Blade 9ft9in 3/4in 5-8 Tpi Bi-metal

Product Description

The LENOX 93663RPB92970 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shop and trade environments. The blade measures 9 feet 9 inches in length and 3/4 inch in width, with a 0.035-inch body thickness and a kerf width of 0.058 inches. It runs a variable 5 to 8 TPI pitch pattern with a Vari-Raker tooth set and a positive rake angle. The high-speed steel teeth are bonded to a spring steel back, making it part of the RX Plus series. Installation and blade changes are handled by machinists, tool-and-die technicians, and fabrication professionals.

This blade is suited for horizontal and vertical bandsaw machines used in metal fabrication shops, maintenance facilities, and industrial service environments. The variable pitch design reduces vibration and harmonics during cuts, which improves surface finish and extends blade life when cutting solid bar stock, structural shapes, and tubing. The bi-metal M42 construction handles both ferrous and non-ferrous metals without frequent blade changes. It is sold as a single welded loop, ready to mount without additional splicing.

Key Features

• Variable 5 to 8 TPI pitch with Vari-Raker tooth set reduces vibration and improves cut quality
• M42 high-speed steel teeth bonded to a spring steel back for durability under continuous cutting loads
• 3/4-inch blade width supports straight and contour-adjacent cuts on most mid-size bandsaw frames
• 0.058-inch kerf width minimizes material loss per cut
• Positive rake angle accelerates chip removal and reduces heat buildup
• Factory-welded loop ships ready to install with no field splicing required

Compatibility

Designed as a welded replacement bandsaw blade for mid-size metal-cutting bandsaws that accept a 9-foot 9-inch loop, 3/4-inch blade width, and 0.035-inch blade thickness. Verify your saw's wheel diameter and blade guide specifications before installation.

Installation Notes

Bandsaw blade changes should be performed by qualified machinists or equipment operators following the saw manufacturer's lockout/tagout procedure before opening the blade guards. Ensure wheel tracking and blade tension are set to the saw manufacturer's specifications for the blade width before powering the machine. Do not exceed the blade's rated wheel diameter range, as improper tensioning can cause premature fatigue or blade failure. Blade disposal should follow applicable shop safety procedures for sharp metal scrap.