Lenox 93232RPB134115 Welded Bandsaw Blade 5-8 Tpi

Product Description

The LENOX 93232RPB134115 is a welded bi-metal bandsaw blade built for demanding metal-cutting applications in industrial and shop environments. At 13 feet 6 inches in length and 1 inch wide, this blade fits mid-size to large vertical or horizontal band saws. The variable pitch tooth form ranges from 5 to 8 TPI, allowing it to transition efficiently across varying material thicknesses and cross-sections. The M42 high-speed steel tooth material delivers heat resistance and edge retention during prolonged cuts. The spring steel back provides flex and fatigue resistance. This blade is installed by machinists, fabricators, and maintenance mechanics working with structural metals, tubing, and solid stock.

This blade is suited for metal-cutting band saws in production shops, fabrication facilities, and maintenance departments. The variable pitch and Vari-Raker tooth set reduce harmonic vibration and chatter during cuts, which is particularly useful when sawing bundles, irregular profiles, or mixed cross-sections. The LENOX RX Plus series is designed for high-cycle production cutting where blade life and cut consistency are the primary performance metrics. It is sold individually and ships as a single pre-welded loop ready for installation.

Key Features

• M42 high-speed steel teeth for extended cutting life in ferrous and non-ferrous metals
• Variable pitch 5 to 8 TPI reduces vibration and improves cut quality across varying cross-sections
• Vari-Raker tooth set minimizes chatter and lowers cutting forces
• Spring steel back provides flexibility and resistance to fatigue cracking
• 0.058 inch kerf width for efficient material removal with minimal waste
• Pre-welded loop construction — ready to install with no field welding required

Compatibility

Designed as an OEM-style replacement or direct-fit blade for band saws accepting a 13 foot 6 inch loop, 1 inch wide blade with 0.035 inch thickness. Verify your machine's blade length, width, and thickness specifications before installation.

Installation Notes

Band saw blade installation should be performed by a qualified machinist or maintenance technician with the machine fully powered down and locked out per OSHA lockout/tagout procedures. Wear cut-resistant gloves when handling the coiled or looped blade, as tooth edges are sharp. Confirm correct blade tension using the band saw manufacturer's tensioning guide before resuming operation. Do not run the blade above the feed rate or speed range appropriate for the tooth pitch and material being cut.