Lenox 93220RPB144420 Bandsaw Blade 14 Ft 6 in 5-8 Tpi

Product Description

The LENOX 93220RPB144420 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications. The blade runs 14 feet 6 inches long, 1 inch wide, and 0.035 inches thick, with a variable-pitch tooth pattern ranging from 5 to 8 TPI. High speed steel M42 teeth are set in a Vari-Raker pattern and bonded to a spring steel back, combining tooth toughness with blade flexibility. The result is a blade suited for production sawing where consistent cut quality and extended blade life are priorities. Metalworking shops, fabricators, and industrial maintenance crews are the primary installers.

This blade is intended for use on horizontal or vertical metal-cutting bandsaws that accept a 14-foot 6-inch blade. The variable 5 to 8 TPI pitch makes it effective across a range of solid bar, structural, and tubular stock — particularly useful when a single blade must handle varying cross-sections in a production environment. The Vari-Raker tooth set reduces vibration and harmonic chatter during the cut, which is especially noticeable when transitioning between thin-wall and thick-section material. The positive rake angle promotes aggressive, efficient cutting on ferrous and non-ferrous metals.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for durability and flex resistance
• Variable pitch 5 to 8 TPI with Vari-Raker tooth set reduces vibration and improves cut finish
• Positive rake angle promotes aggressive, efficient stock removal
• 0.058-inch kerf width minimizes material loss per cut
• Welded construction for reliable joint integrity at operating tension and speed
• RX Plus series blade designed for demanding production metal-cutting environments

Compatibility

Designed as a direct-fit replacement for metal-cutting bandsaws requiring a 14-foot 6-inch by 1-inch bi-metal blade. Verify your saw's blade length, width, and thickness specifications before installation.

Installation Notes

Installation should be performed by qualified metalworking or maintenance personnel familiar with bandsaw setup and blade tensioning procedures. Disconnect and lock out power to the saw before removing the existing blade or threading the new blade through blade guides. Follow the saw manufacturer's recommended tension and tracking settings for a 1-inch-wide bi-metal blade. Wear cut-resistant gloves when handling the coiled or uncoiled blade.