Lenox 93031RPB134115 Welded Bandsaw Blade 5-8 Tpi

Product Description

The LENOX 93031RPB134115 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in fabrication and maintenance environments. At 162 inches in total length and 1-1/4 inches wide, this blade is built around an M42 high-speed steel tooth material bonded to a spring steel back. The variable pitch tooth form runs 5 to 8 TPI with a Vari-Raker tooth set, which reduces vibration and harmonic chatter during the cut. At 0.042 inches thick with a kerf width of 0.068 inches, it is sized for industrial vertical and horizontal bandsaws commonly found in machine shops and fabrication facilities. Installation and tensioning are handled by qualified machinists or maintenance technicians.

This blade is part of the LENOX RX Plus series, designed for cutting structural steel, tubing, solid bar stock, and other ferrous metals. The positive rake angle and variable pitch pattern make it effective across a range of cross-sections, reducing blade loading when transitioning between different material profiles. It is suited for high-production environments where consistent cut quality and blade life are priorities. The welded construction delivers a reliable, factory-finished joint ready for immediate use on compatible bandsaw equipment.

Key Features

• M42 high-speed steel teeth bonded to a spring steel back for extended blade life on ferrous metals
• Variable pitch 5 to 8 TPI with Vari-Raker tooth set reduces vibration and noise during cutting
• Positive rake angle improves chip clearance and cut efficiency on bar stock and structural shapes
• 0.068 inch kerf width minimizes material loss per cut
• Factory-welded joint provides a consistent, ready-to-install blade loop
• RX Plus series construction suited for high-cycle production cutting environments

Compatibility

Designed as an OEM-style replacement or aftermarket bandsaw blade for industrial vertical and horizontal bandsaws accepting a 162-inch blade loop that is 1-1/4 inches wide and 0.042 inches thick.

Installation Notes

Bandsaw blade installation should be performed by a qualified machinist or maintenance technician with the saw fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Verify that the blade length, width, and thickness match the saw manufacturer specifications before mounting. Tension the blade according to the saw manufacturer guidelines and confirm blade tracking before resuming operation. Always use appropriate blade-handling gloves when uncoiling or mounting bandsaw blades to prevent laceration.