Lenox 91027NEB103175 Welded Bandsaw Blade 14 Tpi

Product Description

The LENOX 91027NEB103175 is a welded carbon steel bandsaw blade designed for contour cutting applications in metal fabrication, woodworking, and general shop use. At 10 feet 5 inches in length and 0.032 inches thick, this blade runs on standard bandsaw machines requiring that loop size. The 3/4-inch width and 14 teeth per inch constant-pitch configuration deliver consistent, controlled cuts on a range of workpiece materials. The raker tooth set and straight tooth form help clear chips efficiently during continuous cutting operations. This blade is installed by machinists, fabricators, and maintenance technicians working with stationary bandsaw equipment.

This blade is suited for production and maintenance environments where a reliable constant-pitch carbon steel blade is needed for contour cutting. The 14 TPI count makes it appropriate for cutting medium-section stock where a balance between cut speed and surface finish is required. The hard back construction provides rigidity and resistance to flex fatigue during extended cutting cycles. Shops running standard vertical or horizontal bandsaws in the 10-foot 5-inch wheel circumference range are the primary application.

Key Features

• Welded loop construction at 10 feet 5 inches total blade length
• 14 TPI constant-pitch pattern for consistent chip load and cut finish
• 3/4-inch blade width for stable tracking and contour cutting capability
• Raker tooth set promotes efficient chip evacuation during cutting
• Hard back construction resists flex fatigue over extended use
• Carbon steel blade and tooth material suitable for general-purpose cutting

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for stationary bandsaw machines requiring a 10-foot 5-inch blade loop with a 3/4-inch width.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician with the machine fully powered down and locked out per applicable OSHA lockout/tagout procedures. Verify wheel diameter and blade guides are set correctly for the 3/4-inch blade width before tensioning. Do not exceed the blade speed rating of the host machine. Inspect blade welds and guide bearings after installation before resuming production cuts.