Lenox 90931NEB72360 Welded Bandsaw Blade 8 Tpi

Product Description

The LENOX 90931NEB72360 is a welded bandsaw blade designed for contour cutting applications in metal fabrication, plumbing, and mechanical trade shops. The blade measures 7 feet 9 inches in length and 3/4 inch in width with a 0.032-inch thickness. It runs at 8 teeth per inch (TPI) with a constant pitch pattern, making it well suited for general-purpose cutting on consistent stock. The blade body and tooth material are both carbon steel with a hard back, a raker tooth set, and a straight tooth form. Licensed tradespeople and shop technicians working with bandsaws in production or service environments are the primary installers and users of this blade.

This blade is intended for use on bandsaw machines configured to accept a 7-foot 9-inch loop blade. The 8 TPI constant pitch and raker set pattern perform reliably on ferrous and non-ferrous materials of moderate thickness. The toothed cutting edge and straight tooth form provide predictable chip clearance during contour cuts. Typical applications include pipe fabrication shops, mechanical contractors cutting structural stock, and general metalworking operations where repeatable, clean cuts are required on a horizontal or vertical bandsaw.

Key Features

• Welded loop construction — 7 feet 9 inches total blade length
• 3/4-inch blade width with 0.032-inch thickness for stable tracking
• 8 TPI constant pitch for consistent chip load on moderate stock
• Raker tooth set with straight tooth form for controlled contour cutting
• Carbon steel blade body and tooth material with hard back for rigidity
• Toothed cutting edge supports contour cutting applications

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for machines configured to accept a 7-foot 9-inch blade loop in 3/4-inch width.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician following the bandsaw manufacturer's lockout and tagout procedure before opening the blade guards. Verify blade tension and tracking alignment after installation according to the machine manufacturer's specifications. Blade handling requires cut-resistant gloves due to exposed tooth edges along the full loop length. Confirm the replacement blade length and width match the machine's rated capacity before tensioning.