Lenox 90551NEB82440 Welded Bandsaw Blade 14 Tpi

Product Description

The LENOX 90551NEB82440 is a welded bandsaw blade designed for contour cutting applications in metal fabrication, maintenance, and industrial trade environments. Built from carbon steel with a carbon steel tooth construction, this blade measures 8 feet in length and 1/2 inch in width with a 0.025-inch thickness. It runs at 14 teeth per inch with a constant pitch and raker tooth set, delivering consistent chip removal and smooth cuts on a range of workpiece materials. The straight tooth form and hard back type contribute to stable tracking and predictable blade life under continuous use. Licensed tradespeople and shop technicians are the primary installers and users.

This blade is suited for horizontal and vertical bandsaw machines configured for contour cutting. The 8-foot loop length fits a common range of mid-size industrial and shop bandsaws. The 14 TPI constant pitch makes it appropriate for cutting solid stock, tubing, and structural shapes where a balance of cut speed and finish quality is needed. It ships as a single pre-welded loop, ready to mount without field welding or joining.

Key Features

• 8-foot welded loop length — no field joining required
• 14 TPI constant pitch for balanced cut speed and surface finish
• Raker tooth set for efficient chip clearance in solid and structural stock
• Carbon steel blade and tooth material for general-purpose cutting duty
• Hard back type for stable tracking and reduced blade wander
• Straight tooth form suited to contour and cross-section cutting

Compatibility

Designed as a replacement welded bandsaw blade for mid-size bandsaw machines accepting an 8-foot blade loop with a 1/2-inch blade width.

Installation Notes

Bandsaw blade replacement should be performed by qualified shop technicians or tradespeople familiar with the specific machine model. Disconnect and lock out power to the bandsaw before removing the old blade or mounting the new one. Verify that blade guides, thrust bearings, and wheel tires are in serviceable condition before tensioning the new blade. Follow the bandsaw manufacturer's tensioning and tracking procedure — do not operate with improper tension, as this shortens blade life and creates a safety hazard.