Lenox 90503NEB72360 Welded Bandsaw Blade 10 Tpi Carbon Steel

Product Description

The LENOX 90503NEB72360 is a welded bandsaw blade designed for contour cutting applications in metalworking and fabrication environments. Measuring 7 feet 9 inches in length and 0.5 inches wide, this blade runs at 10 teeth per inch (TPI) with a constant pitch pattern and a raker tooth set. The straight tooth form and toothed cutting edge deliver consistent, controlled cuts through a range of materials. Constructed from carbon steel on both the blade body and tooth, it is built for durability in sustained cutting operations. Licensed tradespeople and shop professionals install and service these blades on standard bandsaw equipment.

This blade is suited for contour cutting tasks in professional shop settings, including fabrication, maintenance, and repair operations. The 10 TPI constant pitch configuration is well-matched for cutting stock of moderate thickness where a balance of cut speed and surface finish is required. The raker tooth set helps clear chips efficiently during continuous cuts. At 7 feet 9 inches, this blade fits bandsaws with the corresponding wheel-to-wheel dimension. Verify your machine's required blade length before installation.

Key Features

• 10 TPI constant pitch for consistent, controlled material removal
• Raker tooth set promotes efficient chip clearance during continuous cuts
• Carbon steel blade body and tooth material for durable performance
• Straight tooth form with toothed cutting edge
• Hard back type for rigidity and blade tracking stability
• Contour cutting capable for curved and irregular workpiece profiles

Compatibility

Designed as an OEM-style replacement or aftermarket bandsaw blade for bandsaws requiring a 7-foot 9-inch blade length with a 0.5-inch blade width.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician following the equipment manufacturer's guidelines. Disconnect and lock out power to the bandsaw before removing or installing any blade. Wear cut-resistant gloves when handling the blade, as edges are sharp. Confirm blade tension, tracking, and guide settings after installation before returning the machine to service.