Lenox 87922CLB134115 Welded Bandsaw Blade Bi-metal

Product Description

The LENOX 87922CLB134115 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional fabrication and maintenance environments. The blade measures 13 feet 6 inches in length, 1 inch wide, and 0.035 inches thick, with a variable pitch tooth pattern ranging from 6 to 10 TPI. The cutting teeth are ground from M42 high speed steel and set in a Vari-Raker pattern, which reduces vibration and extends tooth life during interrupted cuts. Licensed HVAC, plumbing, mechanical, and general fabrication technicians who operate vertical or horizontal band saws will recognize this as a production-grade blade suited for high-volume cutting cycles.

This blade is designed for contour-free, straight cutting of a broad range of metals including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch tooth form minimizes harmonic vibration across varying material thicknesses, making it well-suited for production shops, pipe fabrication yards, and mechanical service operations that process mixed stock throughout the day. The spring steel back provides consistent blade tension tracking on the saw guides during extended runs.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for durability under continuous use
• Variable pitch 6 to 10 TPI Vari-Raker tooth set reduces vibration and chatter on varying material cross-sections
• 0.058 inches kerf width for predictable material removal and dimensional accuracy
• Cuts alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and non-ferrous metals
• Welded loop construction in LENOX Classic series for consistent weld integrity at the joint
• Straight toothed cutting edge with no rake angle, optimized for controlled feed-rate cutting

Compatibility

Designed to fit band saw machines that accept a 13-foot 6-inch blade loop, 1 inch wide and 0.035 inches thick. Verify your saw manufacturer's blade specification chart for length tolerance, wheel diameter, and guide clearance before installation.

Installation Notes

Blade installation and tensioning should be performed by a qualified technician following the band saw manufacturer's service instructions. Always power down and lock out the saw at the main disconnect before removing or installing a blade. Wear cut-resistant gloves when handling the coiled blade, as the teeth present a laceration hazard during uncoiling and threading. Confirm proper blade tension and track alignment before resuming cutting operations.