Lenox 87876CLB92745 Welded Bandsaw Blade 9 Ft 6-10 Tpi

Product Description

The LENOX 87876CLB92745 is a welded bi-metal bandsaw blade designed for continuous-duty cutting on metal-cutting bandsaws. At 9 feet long and 3/4 inch wide, it fits a range of mid-size horizontal and vertical bandsaw machines common in fabrication and maintenance shops. The blade is constructed with an M42 high speed steel tooth edge bonded to a spring steel back, giving it heat and wear resistance under sustained cutting loads. A variable pitch tooth form with Vari-Raker tooth set in the 6 to 10 TPI range reduces vibration and produces efficient chip clearance across varying material cross-sections. Blade thickness is 0.035 inches with a kerf width of 0.058 inches.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. The variable pitch design handles both thin-wall and solid-section workpieces without requiring a blade change, making it practical for job shops and maintenance facilities that cut mixed stock. It is a straight contour-cutting blade and is not intended for radius or contour cuts. The Classic series designation places it in a general-purpose, production-grade category appropriate for daily shop use.

Key Features

• M42 high speed steel teeth for heat resistance and extended blade life in ferrous and non-ferrous cutting
• Variable pitch 6 to 10 TPI with Vari-Raker set reduces vibration and improves chip evacuation
• Spring steel back provides flexibility and fatigue resistance over continuous welded-loop use
• 0.035 inch blade thickness and 0.058 inch kerf minimize material loss per cut
• Compatible with alloy steel, stainless steel, aluminum, carbon steel, tool steel, and structural steel stock
• Pre-welded loop construction ready to install without field welding

Compatibility

Designed as a replacement or production-stock welded bandsaw blade for metal-cutting bandsaw machines that accept a 9-foot blade loop with a 3/4 inch blade width.

Installation Notes

Bandsaw blade changes should be performed by a qualified technician following the machine manufacturer's blade-change procedure. Disconnect and lock out power to the bandsaw before removing the guard or handling the blade. Verify wheel diameter and blade guide settings are appropriate for 3/4 inch blade width before tensioning. Wear cut-resistant gloves when handling the coiled or uncoiled blade loop.