Lenox 87462D2B103175 Bandsaw Blade 125in 14 Tpi Bi-metal

Product Description

The LENOX 87462D2B103175 is a welded bi-metal bandsaw blade built for continuous contour cutting in demanding shop and trade environments. At 125 inches (10 feet 5 inches) long and 0.5 inches wide with a 0.035-inch thickness, it fits a wide range of horizontal and vertical bandsaw machines. The blade runs a 14 TPI constant pitch with a straight tooth form and single level set, producing a 0.058-inch kerf. The M42 high-speed steel tooth material bonded to a spring steel back gives this Classic-series blade its resistance to heat and wear during extended cuts through hard materials.

This blade is suited for metal fabrication shops, maintenance and repair facilities, and trade contractors who cut structural materials on a bandsaw. Rated for contour cutting, it handles alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, other non-ferrous metals, and wood. The 14 TPI pitch makes it a practical choice for moderate cross-sections where a balance of cut speed and surface finish is needed. It ships as a single pre-welded loop ready to install without field welding.

Key Features

• Bi-metal construction: M42 high-speed steel teeth bonded to a spring steel back for extended blade life
• 14 TPI constant pitch with straight tooth form and single level set for consistent chip clearance
• 0.058-inch kerf width minimizes material loss per cut
• Contour cutting capable across a broad range of metals and wood
• Pre-welded loop at 125 inches eliminates field welding and reduces setup time
• Classic series standard pitch pattern for general-purpose bandsaw applications

Compatibility

Designed as a replacement or spare welded bandsaw blade for horizontal and vertical bandsaw machines accepting a 125-inch (10 feet 5 inches) loop, 0.5-inch wide, 0.035-inch thick blade.

Installation Notes

Bandsaw blade replacement is typically performed by a machinist, tool-and-die technician, or qualified maintenance mechanic. Disconnect and lock out all power to the saw before removing the old blade or installing the new one. Verify blade tension, tracking adjustment, and guide bearing clearance according to the saw manufacturer specifications before returning the machine to service. Always wear cut-resistant gloves when handling coiled or looped bandsaw blades.