Lenox 86032D2B72360 Bi-metal Bandsaw Blade 93in 14 Tpi

Product Description

The LENOX 86032D2B72360 is a bi-metal welded bandsaw blade designed for contour and general-purpose cutting on stationary band saws. Measuring 93 inches in length and 1/2 inch in width, this blade is built with an M42 high speed steel tooth material bonded to a spring steel back. It runs a 14 TPI constant pitch with a straight tooth form and single level set, producing a kerf width of 0.058 inches. Licensed HVAC techs, pipefitters, plumbers, and metalworkers who cut structural or alloy steel stock will find this blade suited for high-cycle shop use. Installation is straightforward on any band saw sized for a 93-inch blade loop.

This blade is built for cutting a wide range of materials including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, other non-ferrous metals, and wood. The bi-metal M42 construction handles both ferrous and non-ferrous stock, making it a practical choice for trade shops and fabrication environments where material types vary job to job. The 14 TPI constant pitch is well suited for medium-thickness stock where clean, controlled cuts are required. The toothed and milled cutting edge supports consistent performance across extended use.

Key Features

• Bi-metal construction: M42 high speed steel teeth on a spring steel back for durability and flex resistance
• 14 TPI constant pitch with straight tooth form for consistent medium-material cuts
• Single level set teeth produce a 0.058-inch kerf width
• Contour cutting capable for curved and irregular cut paths
• Toothed and milled cutting edge for smooth, repeatable performance
• Compatible with a broad material range: alloy steel, stainless steel, aluminum, non-ferrous metals, carbon steel, structural steel, tool steel, and wood

Compatibility

Designed as an OEM-style replacement or direct-fit blade for stationary band saws requiring a 93-inch welded loop blade in 1/2-inch width.

Installation Notes

Band saw blade replacement should be performed by a qualified technician with the machine fully de-energized and locked out per applicable OSHA lockout/tagout procedures. Verify wheel diameter, blade length, and blade width specifications match the saw before installation. Tension the blade to the saw manufacturer's specified setting and confirm blade tracking before resuming operation. Do not run the blade above the feed rate or speed recommended for the material being cut.