Lenox 85028CLB134015 Welded Bandsaw Blade 8-12 Tpi

Product Description

The LENOX 85028CLB134015 is a welded bi-metal bandsaw blade designed for continuous cutting of a wide range of metals in stationary band saw applications. The blade measures 13 feet 2 inches in length and 1 inch in width, with a 0.035-inch back thickness and a kerf width of 0.058 inches. It features a variable pitch tooth form at 8 to 12 TPI with a Vari-Raker tooth set, which reduces vibration and harmonic resonance during cuts. The M42 high-speed steel tooth material provides heat and wear resistance when cutting harder alloys. Licensed HVAC technicians, pipefitters, plumbers, and metal fabricators working with structural and alloy materials are the primary installers and users of this blade.

This blade is suited for production and service shop environments where a single blade must handle multiple material types without frequent changes. It is rated for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch design helps minimize blade noise and tooth strippage when transitioning between varying cross-sections or wall thicknesses, making it practical for both solid bar stock and tubing. It is not intended for contour or radius cutting applications.

Key Features

• Bi-metal construction with M42 high-speed steel teeth bonded to a spring steel back for durability and flex resistance
• Variable pitch at 8 to 12 TPI with Vari-Raker tooth set reduces vibration and extends blade life
• 0.058-inch kerf width delivers efficient material removal with minimal waste
• Rated for alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and non-ferrous metals
• Factory-welded loop eliminates field welding and ensures a consistent, balanced joint
• LENOX Classic series construction for consistent dimensional tolerances across the blade length

Compatibility

Designed as a replacement or production bandsaw blade for stationary horizontal and vertical band saws accepting a 13-foot 2-inch by 1-inch blade. Verify blade length, width, and thickness specifications against the machine manufacturer requirements before installation.

Installation Notes

Bandsaw blade installation and tensioning should be performed by a qualified operator or machinist following the band saw manufacturer guidelines. Always power down and lock out the machine before removing or installing a blade. Wear cut-resistant gloves when handling the blade, as the tooth edge is exposed along the full length. Set blade tension and tracking per the machine specification before running under load.