Lenox 83349CLB113380 Welded Bandsaw Blade 10-14 Tpi

Product Description

The LENOX 83349CLB113380 is a welded bi-metal bandsaw blade engineered for demanding metal-cutting applications in professional shops and fabrication environments. The blade measures 11 feet 1 inch in overall length and 3/4 inch in width, with a 0.035-inch blade thickness and a 0.058-inch kerf width. The cutting edge uses a variable-pitch tooth form in a 10 to 14 TPI range, which reduces vibration and harmonics during the cut. The tooth material is M42 high-speed steel, a cobalt-bearing grade known for sustained edge life when cutting hard and abrasive stock. The back is spring steel for fatigue resistance during continuous band operation. Licensed trades and professional metalworkers install and operate this blade.

This blade is suited for contour-free, straight bandsaw cutting across a wide range of metals in residential shop, commercial fabrication, and industrial maintenance settings. Compatible material applications include alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable-pitch Vari-Raker tooth set is particularly effective on interrupted cuts, thin-wall tubing, and mixed cross-sections where a fixed-pitch blade would chatter. It is a strong fit for horizontal and vertical metal-cutting bandsaws that accept a 3/4-inch blade in the 11-foot 1-inch loop size.

Key Features

• Bi-metal construction with M42 high-speed steel teeth bonded to a spring steel back for extended service life
• Variable-pitch Vari-Raker tooth form at 10 to 14 TPI reduces vibration and improves surface finish
• 0.058-inch kerf width minimizes material loss on high-value stock
• Cuts alloy steel, carbon steel, stainless steel, tool steel, aluminum, and non-ferrous metals
• Welded loop construction — 11 feet 1 inch length, 3/4 inch width, ready to install
• LENOX Classic series — designed for consistent performance across production and maintenance cutting cycles

Compatibility

Designed as a direct-fit welded bandsaw blade for metal-cutting bandsaws that accept a 3/4-inch blade in an 11-foot 1-inch loop length. Suitable for cutting alloy steel, aluminum, non-ferrous metals, carbon steel, stainless steel, structural steel, and tool steel as specified by the manufacturer.

Installation Notes

Installation should be performed by a qualified operator familiar with bandsaw blade tracking, tensioning, and guiding procedures. Disconnect and lock out power to the bandsaw before removing the old blade or installing the new one. Confirm that blade guides, thrust bearings, and wheel tires are in serviceable condition before tensioning the new blade. Do not exceed the blade speed or feed rate recommended by the bandsaw manufacturer for the material being cut.