Lenox 82185D2B154725 Bandsaw Blade 10 Tpi Bi-metal

Product Description

The LENOX 82185D2B154725 is a welded bi-metal bandsaw blade engineered for continuous cutting on metal-cutting and general-purpose band saws. Measuring 15 feet 6 inches in length and 0.5 inches wide, it runs at a constant 10 teeth per inch (TPI) with a straight tooth form and single-level set for predictable, repeatable cuts. The tooth tips are M42 high speed steel, a cobalt-bearing grade that resists heat and wear when cutting hard alloys. The back is spring steel, which absorbs flex stress over the blade's life. At 0.035 inches thick and a kerf width of 0.058 inches, material loss per pass is minimal. Licensed HVAC technicians, pipefitters, plumbers, and general fabricators rely on this blade for cutting structural and specialty metals in the shop or field.

This blade is suited for contour and straight cutting across a wide range of materials including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 10 TPI constant pitch pattern and milled toothed edge make it a practical choice for general fabrication shops, mechanical contractors, and service technicians who need a dependable all-around blade for mixed-material cutting tasks. It ships as a single pre-welded loop, ready to install without additional joining.

Key Features

• Bi-metal construction with M42 high speed steel tooth tips for extended wear life on hard alloys
• Spring steel back absorbs flex and reduces blade fatigue during long cuts
• 10 TPI constant pitch delivers smooth, consistent stock removal across multiple materials
• Straight tooth form with single-level set minimizes burr and supports clean kerf geometry
• Contour cutting capable for curved or irregular workpiece profiles
• Pre-welded loop requires no field joining — install directly onto the saw

Compatibility

Designed as an OEM-style replacement or direct-fit blade for band saws accepting a 15-foot 6-inch loop, 0.5-inch wide, 0.035-inch thick blade with a 10 TPI pitch.

Installation Notes

Blade installation should be performed by a qualified technician familiar with band saw safety procedures. Disconnect and lock out power to the saw before opening the blade guards or changing blades. Verify wheel diameter, blade length, width, and thickness specifications match the saw manufacturer requirements before mounting. Wear cut-resistant gloves when handling the coiled or looped blade, and confirm blade tension and tracking per the saw manufacturer guidelines before resuming operation.