Lenox 82167D2B144545 Bandsaw Blade 14ft 11in 10-14 Tpi

Product Description

The LENOX 82167D2B144545 is a welded bi-metal bandsaw blade designed for demanding metal-cutting and general fabrication applications. The blade measures 14 feet 11 inches in length and 1/2 inch in width, with a 0.025-inch thickness and a variable pitch of 10 to 14 TPI. The cutting edge uses a Vari-Raker tooth set with no rake angle, delivering consistent chip clearance and reduced vibration across varying material thicknesses. The M42 high speed steel tooth tips are electron-beam welded to a spring steel back, making this blade well suited for production cutting environments where blade life and cut quality matter.

This blade is rated for contour cutting and handles a wide range of materials including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. It is a strong fit for metal fabrication shops, maintenance facilities, and industrial service environments running vertical or horizontal band saws sized for a 14-foot 11-inch blade. The LENOX Classic series is a recognized workhorse in production and job-shop settings where consistent performance across mixed material runs is required.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for extended blade life
• Variable pitch (10 to 14 TPI) with Vari-Raker tooth set reduces vibration and chatter on varying cross-sections
• 0.0430-inch kerf width minimizes material waste per cut
• Contour-cutting capable, suitable for curved and irregular workpieces
• Compatible with a broad material range: alloy steel, stainless steel, aluminum, non-ferrous metals, tool steel, and wood
• Welded construction provides a consistent, balanced loop with no joint fatigue points

Compatibility

Designed as a direct-fit replacement or upgrade blade for band saws accepting a 14-foot 11-inch, 1/2-inch-wide blade loop. Verify your saw's wheel diameter and blade guide spacing against these dimensions before installation.

Installation Notes

Band saw blade installation should be performed by a qualified technician familiar with blade tensioning and tracking procedures. Power down and lock out the saw before removing the old blade or installing the new one. Wear cut-resistant gloves when handling the coiled or uncoiled blade. Confirm proper blade tension and tracking alignment before resuming cuts, and always run the blade through a brief break-in period at reduced feed pressure on initial use.