Lenox 82064D2B123910 Bandsaw Blade 12 Ft 10 in 6 Tpi

Product Description

The LENOX 82064D2B123910 is a welded bi-metal bandsaw blade designed for continuous contour cutting across a wide range of metals and materials. The blade measures 12 feet 10 inches in length and 1/2 inch in width, with a 0.025-inch thickness and a 6 teeth-per-inch (TPI) constant pitch. The tooth material is M42 high-speed steel, set in a hook-tooth form with a positive rake angle and single-level set for aggressive, efficient stock removal. The spring steel back provides flexibility and fatigue resistance under continuous bandsaw operation. Licensed HVAC, plumbing, and general mechanical trades rely on this blade for cutting metal pipe, structural members, and alloy stock.

This blade is suited for vertical and horizontal bandsaw machines in shop and field environments. It is rated for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 6 TPI pitch and hook-tooth geometry make it a practical choice for thicker cross-sections and faster cuts where surface finish is secondary to throughput. It is sold and packaged as a single blade per unit.

Key Features

• Bi-metal construction with M42 high-speed steel teeth welded to a spring steel back for durability and flex resistance
• 6 TPI hook-tooth form with positive rake angle for aggressive cutting and efficient chip clearance
• Single-level set tooth geometry reduces kerf width to 0.043 inches, minimizing material waste
• Contour cutting capable for curved and straight cuts on a broad range of metals
• Constant standard pitch pattern for consistent, predictable cut performance
• Compatible with alloy steel, stainless steel, aluminum, non-ferrous metals, carbon steel, structural steel, tool steel, and wood

Compatibility

Designed as a welded replacement bandsaw blade for vertical and horizontal bandsaw machines that accept a 1/2-inch wide blade in the 12-foot 10-inch loop length. Confirm your machine's wheel diameter and blade guides accept 1/2-inch width before installation.

Installation Notes

Installation should be performed by a qualified technician familiar with bandsaw blade tensioning and tracking procedures. Power down and lock out the bandsaw before removing the old blade or installing the new one. Wear cut-resistant gloves when handling the coiled blade, as the edges are sharp. Follow the bandsaw manufacturer's recommended tension setting for 1/2-inch bi-metal blades and verify blade tracking before resuming operation.