Lenox 82048D2B123810 Bandsaw Blade 12.5 Ft 6 Tpi Bi-metal

Product Description

The LENOX 82048D2B123810 is a bi-metal welded bandsaw blade engineered for contour cutting applications across a broad range of materials. At 12 feet 6 inches long and 1/2 inch wide, the blade features an M42 high-speed steel tooth edge on a spring steel back, providing the combination of edge hardness and back flexibility required for consistent band saw operation. The hook tooth form with a positive rake angle promotes aggressive chip removal, while the single-level set and 0.0580-inch kerf width help balance cut speed with surface finish quality. This blade is sold as a single unit and is well suited for stationary vertical or horizontal band saw machines used in fabrication and metalworking shops.

This blade is rated for contour cutting in alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. It is a practical choice for maintenance and fabrication shops that need one blade capable of handling varied stock without frequent changes. The constant pitch pattern at 6 TPI makes it best suited for stock with consistent cross-sections rather than thin-wall tubing or sheet. It is typically installed by machinists and metalworking technicians on band saws requiring a 12-foot 6-inch blade loop.

Key Features

• M42 high-speed steel teeth bonded to a spring steel back for durability and flex resistance
• Hook tooth form with positive rake angle for fast, aggressive cuts
• 6 TPI constant pitch suits solid stock and structural profiles
• Single-level tooth set with 0.0580-inch kerf width for controlled material removal
• Rated for a wide material range including stainless steel, tool steel, aluminum, and wood
• Welded loop construction ready for direct installation on compatible band saws

Compatibility

Designed as a direct-fit replacement for band saws requiring a 12-foot 6-inch blade loop with a 1/2-inch blade width. Confirm wheel diameter, blade guide clearance, and wheel spacing on the specific machine before installation.

Installation Notes

Installation should be performed by a qualified machinist or technician with the band saw fully powered down and locked out per OSHA lockout/tagout procedures. Inspect blade guides, tensioning wheels, and tracking adjustment before mounting the new blade. Set blade tension and tracking according to the band saw manufacturer specifications before resuming operation. Gloves are recommended when handling the blade loop due to exposed tooth edges.