Lenox 80357D2B144495 Bandsaw Blade 10 Tpi Bi-metal

Product Description

The LENOX 80357D2B144495 is a welded bi-metal bandsaw blade engineered for continuous cutting in metalworking and fabrication environments. Measuring 14 feet 9 inches in length and 0.5 inches wide, it runs at 10 teeth per inch with a constant pitch and straight tooth form. The blade body is spring steel for flexibility and fatigue resistance, while the tooth tips are M42 high-speed steel for edge retention under heat and load. A single-level tooth set and milled cutting edge deliver consistent kerf control across a wide range of materials. Licensed trade fabricators, maintenance machinists, and metal shop technicians are the primary installers.

This blade is suited for contour cutting in both light industrial and job-site bandsaw applications. It handles alloy steel, carbon steel, stainless steel, structural steel, and tool steel, as well as aluminum, other non-ferrous metals, and wood. The 10 TPI constant pitch pattern makes it a versatile choice when switching between material types on the same saw without changing the blade. The 0.058-inch kerf width is consistent with standard 0.5-inch blade guides on vertical and horizontal bandsaws.

Key Features

• Bi-metal construction with M42 high-speed steel teeth for extended blade life on hard metals
• Spring steel back provides flex resistance and reduces blade fatigue during contour cuts
• 10 TPI constant pitch for consistent chip load across alloy steel, stainless steel, aluminum, and wood
• Single-level tooth set with milled cutting edge for repeatable, clean kerf geometry
• 0.058-inch kerf width suits standard 0.5-inch blade guide assemblies
• Welded construction eliminates mechanical blade joints for smooth, uninterrupted cuts

Compatibility

Designed to fit bandsaws accepting a blade length of 14 feet 9 inches and a 0.5-inch blade width. Verify drive wheel diameter, guide clearance, and blade tension specifications on the host saw before installation.

Installation Notes

Blade installation and tensioning should be performed by a qualified machinist or fabricator familiar with bandsaw setup. Disconnect and lock out all power to the saw before handling the blade. Verify blade tension using the saw manufacturer's tension gauge or deflection specification — do not rely on feel alone. Confirm blade tracking is centered on the drive wheels before resuming cuts, and inspect the weld joint for cracks or deformation at initial run-in.