Lenox 80310D2B72360 Bi-metal Bandsaw Blade 10 Tpi

Product Description

The LENOX 80310D2B72360 is a welded bi-metal bandsaw blade engineered for contour cutting across a wide range of metals and materials. The blade measures 7 feet 9 inches in length and 0.5 inches in width, with a 0.035-inch thickness and a 10 teeth-per-inch (TPI) constant pitch. The tooth material is M42 high speed steel, offering hardness and heat resistance suited for demanding cutting applications. The spring steel back provides flexibility and fatigue resistance during continuous use. This blade is installed by machinists, fabricators, and maintenance trades operating horizontal or vertical bandsaws in shop and industrial environments.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, non-ferrous metals, and wood. The 10 TPI constant pitch and straight tooth form with single level set make it a reliable general-purpose blade for both production and repair cutting environments. The toothed and milled cutting edge delivers consistent kerf geometry across varied stock. It fits bandsaws requiring a 7-foot-9-inch loop length and is part of the LENOX Classic series.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back
• 10 TPI constant pitch with straight tooth form and no rake angle for controlled, uniform cuts
• Single level tooth set produces a 0.058-inch kerf width
• Toothed and milled cutting edge for consistent surface finish
• Contour cutting capable across metals, non-ferrous materials, and wood
• Welded loop construction for standard bandsaw installation

Compatibility

Designed as an OEM-style replacement or aftermarket bandsaw blade for machines requiring a 7-foot-9-inch welded loop blade with a 0.5-inch width and 10 TPI configuration.

Installation Notes

Installation should be performed by a qualified machinist or maintenance technician with the bandsaw fully powered down and locked out per OSHA lockout/tagout procedures. Verify wheel diameter and blade guide clearances match the blade width before mounting. Inspect blade tension settings according to the bandsaw manufacturer specifications before resuming operation. Do not exceed the blade speed rating of the saw for the material being cut.