Lenox 77780CLB154750 Welded Bandsaw Blade 3 Tpi

Product Description

The LENOX 77780CLB154750 is a welded bi-metal bandsaw blade engineered for professional cutting applications across a wide range of metals and structural materials. The blade measures 15 feet 7 inches in length and 3/4 inch in width, with a 0.035-inch blade thickness and a kerf width of 0.060 inches. At 3 teeth per inch with a positive hook tooth rake angle and single level tooth set, this blade is optimized for aggressive stock removal on thicker workpieces. The M42 high speed steel tooth material and spring steel back deliver durability under repeated load. Licensed tradespeople and fabrication professionals install this blade on industrial and production bandsaws.

This blade is suited for use on horizontal and vertical bandsaw machines in metal fabrication, mechanical contracting, and industrial maintenance environments. The 3 TPI hook tooth form and toothed-and-milled cutting edge make it effective on alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. It is part of the LENOX Classic series and is intended for contour-free, straight-cut production sawing where a consistent, repeatable kerf is required.

Key Features

• Bi-metal construction with M42 high speed steel teeth bonded to a spring steel back for extended blade life
• 3 TPI hook tooth form with positive rake angle for aggressive, efficient cuts on thick metal stock
• Single level tooth set with toothed and milled cutting edge for smooth, consistent kerf
• 0.060-inch kerf width minimizes material loss per cut
• Compatible with a broad material range including stainless steel, alloy steel, aluminum, and structural steel
• Standard pitch pattern supports steady feed rates in production cutting environments

Compatibility

Designed as an OEM-style replacement or direct-fit welded bandsaw blade for industrial and production bandsaw machines accepting a 3/4-inch wide blade in the 15-foot 7-inch length.

Installation Notes

Installation should be performed by a qualified machinist or fabrication technician familiar with bandsaw blade tensioning and tracking procedures. Power down and lock out the bandsaw before removing the worn blade or installing a new one, following applicable OSHA lockout-tagout procedures. Verify wheel guides, blade guards, and tensioner settings are within the machine manufacturer's specifications before resuming operation. Do not exceed the bandsaw's rated blade speed for the material being cut.