Lenox 76241CLB82490 Bi-metal Bandsaw Blade 8-12 Tpi

Product Description

The LENOX 76241CLB82490 is a bi-metal welded bandsaw blade built for demanding metal-cutting applications in professional trade and fabrication environments. Measuring 98 inches in length and 3/4 inches wide with a 0.035-inch back thickness, this blade runs on standard horizontal and vertical bandsaws. The cutting edge features an M42 high-speed steel tooth material bonded to a spring steel back, giving it the hardness to cut through tough metals without sacrificing the flexibility needed to resist back cracking. Variable pitch at 8 to 12 TPI and a Vari-Raker tooth set reduce vibration and help manage chip load across a range of material cross-sections. Installers and fabricators use this blade for cut-off and contour work on metal stock.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. It fits bandsaws sized to accept a 98-inch blade with a 3/4-inch wide by 0.035-inch thick profile. The variable pitch design makes it a practical general-purpose selection for shops that cut a mix of material types and cross-sections without swapping blades. It is not rated for contour cutting applications. Metalworking fabricators, millwrights, and maintenance technicians are the primary installers.

Key Features

• M42 high-speed steel teeth bonded to a spring steel back for durability and flexibility
• Variable pitch 8 to 12 TPI with Vari-Raker tooth set to reduce vibration and noise
• 0.058-inch kerf width for efficient material removal with minimal waste
• Rated for alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and non-ferrous metals
• Welded construction for consistent tension and straight tracking on the saw
• LENOX Classic series design for reliable performance in production and maintenance cutting

Compatibility

Designed as an OEM-style replacement or direct-fit blade for bandsaws that accept a 98-inch blade length with a 3/4-inch blade width and 0.035-inch blade thickness.

Installation Notes

Blade installation should be performed by a qualified metalworking technician or fabricator with the bandsaw fully powered down and locked out per OSHA lockout/tagout procedures. Verify wheel diameter and blade guide spacing match the 98-inch length and 3/4-inch width before mounting. Tension and track the blade according to the saw manufacturer specifications before making a cut. Always wear cut-resistant gloves when handling uncoiled bandsaw blades.