Lenox 72618CLB103300 Bandsaw Blade 130 in 8-12 Tpi Bi-metal

Product Description

The LENOX 72618CLB103300 is a welded bi-metal bandsaw blade engineered for continuous metal-cutting operations in stationary bandsaws. The blade measures 130 inches (10 feet 10 inches) in total length, 1 inch wide, and 0.035 inches thick, with a variable pitch tooth pattern spanning 8 to 12 teeth per inch. The M42 high speed steel tooth material delivers hardness and heat resistance for demanding cuts through tough metals. The spring steel back provides flexibility and fatigue resistance during extended cutting cycles. Licensed HVAC, pipefitting, and metal fabrication trades install this blade when cutting various metal stock on vertical or horizontal bandsaw equipment.

This blade is suited for cutting alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch tooth form with Vari-Raker tooth set reduces vibration and chatter across a range of material thicknesses and profiles, making it a practical choice for shops and field cutting operations that process mixed stock. The toothed milled cutting edge provides clean, consistent kerf geometry at 0.058 inches kerf width. It is intended for contour-free, straight cutting applications.

Key Features

• M42 high speed steel teeth for extended cutting life in hard and tough metals
• Variable pitch (8 to 12 TPI) with Vari-Raker tooth set minimizes vibration on varied material thickness
• Spring steel back construction provides flexibility and fatigue resistance
• 0.058-inch kerf width delivers consistent, repeatable cuts
• Welded blade loop ready to install on compatible stationary bandsaw machines
• Compatible with alloy steel, carbon steel, stainless steel, aluminum, and non-ferrous metals

Compatibility

Designed as a direct-fit welded replacement blade for stationary bandsaw machines accepting a 130-inch blade loop that is 1 inch wide. Verify your saw's wheel diameter and blade guide clearance before installation to confirm fitment.

Installation Notes

Bandsaw blade replacement should be performed by a qualified technician familiar with the specific saw model. Power down and lock out the bandsaw at the main disconnect before removing the worn blade or installing the new one. Confirm blade tension and tracking per the saw manufacturer's specifications before resuming operation. Do not exceed the maximum blade speed rating of the host machine for the material being cut.