Lenox 5333FLC1254 Band Saw Blade Coil 1in 100ft Carbon Steel

Product Description

The LENOX 5333FLC1254 is a band saw blade coil stock designed for continuous cutting operations where standard pre-cut blades are impractical. This coil stock measures 1 inch wide and 0.035 inches thick, running 100 feet per coil, and is constructed from carbon steel with a hook tooth form and raker set. The flexible back design allows the blade to be cut and welded to custom lengths on-site. At 20 pounds per coil, it is suited for high-volume shop environments and production cutting applications. Installation is performed by experienced metalworkers, fabricators, or maintenance technicians operating band saw equipment with blade welding capability.

This blade coil stock is intended for contour cutting applications on band saw machines that accept 1-inch blade widths. The constant pitch pattern and 2 teeth per inch (TPI) configuration make it well suited for cutting thicker stock where aggressive material removal is the priority. The raker tooth set provides balanced chip clearance during cuts through ferrous and non-ferrous materials.

Key Features

• 1 inch blade width, 0.035 inch thickness for use on heavy-duty band saw frames
• 100-foot coil length allows custom blade sizing for multiple machines
• 2 TPI constant pitch with hook tooth form for aggressive stock removal
• Raker tooth set for efficient chip clearance and balanced cutting action
• Flexible back construction reduces blade fatigue and supports contour cutting
• Carbon steel construction suitable for a wide range of cutting applications

Compatibility

Designed as a coil-stock replacement for band saw machines that accept 1-inch wide blades and support on-site blade welding or cutting to custom lengths.

Installation Notes

Installation should be performed by a qualified technician familiar with band saw blade welding and tensioning procedures. Disconnect and lock out power to the band saw before handling, mounting, or tensioning any blade. Use appropriate blade welding equipment to cut and join the coil stock to the required finished length. Follow the band saw manufacturer guidelines for blade tension and tracking adjustment before resuming operation.