Lenox 5324FLC3895 Band Saw Blade Coil 3/8 in 100 Ft 4 Tpi

Product Description

The LENOX 5324FLC3895 is a carbon steel band saw blade coil stock designed for continuous cutting operations where job-site blade fabrication is required. The coil measures 100 feet in length and 3/8 inches wide with a blade thickness of 0.025 inches. At 4 teeth per inch with a hook tooth form and raker set, this blade is suited for fast, aggressive cuts through softer metals, wood, and similar materials. The flexible back construction resists fatigue cracking during contour cutting and coiling. Machinists, fabricators, and maintenance trades cut blades to exact lengths from coil stock, reducing waste and cost compared to pre-welded loop blades.

This coil stock is intended for use in horizontal and vertical band saw machines that accept 3/8-inch wide blades. The constant pitch pattern and raker tooth set make it well suited for general-purpose straight and contour cutting in production and maintenance shop environments. The flexible back allows the blade to track smoothly around small-radius wheels without premature cracking. Fabricators working in metal shops, HVAC duct fabrication, pipe fitting, and general industrial maintenance will find this coil format practical for on-demand blade replacement without downtime waiting for pre-welded stock.

Key Features

• Carbon steel construction for reliable performance in general-purpose cutting applications
• 3/8 inch blade width with 0.025 inch thickness for use on standard band saw machines
• 4 teeth per inch with hook tooth form for fast, aggressive material removal
• Raker set pattern promotes efficient chip clearance and reduced heat buildup
• Flexible back design resists fatigue cracking during contour cutting and tight-radius tracking
• 100-foot coil format allows field cutting to exact blade lengths, minimizing waste

Compatibility

Designed for use in band saw machines that accept 3/8-inch wide blade stock. Coil stock must be cut and welded or joined to match the specific throat depth and wheel spacing of the target machine.

Installation Notes

Blade fabrication from coil stock should be performed by qualified personnel using a band saw blade welder and grinder to produce properly joined, deburred loop blades. Disconnect and lock out power to the band saw before changing or installing any blade. Verify blade tension, tracking, and guide alignment after installation per the machine manufacturer's specifications. Follow applicable ANSI and OSHA machine guarding requirements when operating band saws.