Lenox 48167CLB134215 Welded Bandsaw Blade 6-10 Tpi

Product Description

The LENOX 48167CLB134215 is a bi-metal welded bandsaw blade built for demanding cutting applications in metal fabrication and industrial settings. It measures 13 feet 10 inches long, 1 inch wide, and 0.035 inches thick, with a variable pitch of 6 to 10 TPI. The blade body is spring steel backed and uses M42 high-speed steel teeth set in a Vari-Raker pattern. The variable tooth form and pitch reduce vibration and harmonics during cuts, extending blade life and improving surface finish on a wide range of workpiece materials. Licensed tradespeople and fabrication shop technicians are the primary installers and operators.

This blade is suited for contour-free straight cutting on horizontal and vertical bandsaws in both shop and production environments. The M42 tooth material handles alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. The Classic series designation places it within a production-grade product line intended for consistent, repeatable cutting performance across mixed material runs. The 6 to 10 TPI variable pitch makes it a versatile choice when a shop handles multiple material thicknesses rather than a single dedicated stock size.

Key Features

• M42 high-speed steel teeth for hardened and abrasion-resistant material cutting
• Variable 6 to 10 TPI pitch with Vari-Raker tooth set reduces vibration and chatter
• Spring steel back for flex resistance and weld fatigue reduction
• 0.058-inch kerf width minimizes material loss per cut
• Compatible with alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and non-ferrous metals
• Welded construction — ready to install, no field joining required

Compatibility

Designed for bandsaw machines that accept a blade 13 feet 10 inches in length, 1 inch wide, and 0.035 inches thick. Verify wheel diameter, blade guide clearance, and tension specifications on the target machine before installation. This blade does not support contour cutting.

Installation Notes

Bandsaw blade installation and tensioning should be performed by a qualified machine operator or maintenance technician following the saw manufacturer's guidelines. Disconnect and lock out power to the bandsaw before removing or installing any blade. Use appropriate gloves and eye protection when handling bandsaw blades, as edges are sharp. Confirm blade tracking and tension after installation and before resuming cutting operations.