Lenox 47767CLB123810 Welded Bandsaw Blade 4-6 Tpi

Product Description

The LENOX 47767CLB123810 is a welded bi-metal bandsaw blade engineered for continuous cutting on stationary vertical and horizontal band saws. Measuring 150 inches in total length and 0.75 inches wide, this blade runs a variable 4 to 6 TPI pitch pattern with a Vari-Raker tooth set and positive rake angle. The cutting teeth are High Speed Steel M42 grade, bonded to a spring steel back for flexibility and fatigue resistance. At 1.02 pounds, it is a drop-in replacement format suited for metal-cutting band saws in fabrication shops, machine shops, and maintenance facilities. Licensed HVAC, plumbing, or general mechanical contractors who cut structural or alloy tube stock will find this blade ready to run straight from the package.

This blade is designed for cutting a broad range of metals including alloy steel, carbon steel, stainless steel, structural steel, tool steel, aluminum, and other non-ferrous metals. The variable pitch tooth form reduces harmonic vibration and chatter when transitioning between section thicknesses, making it well suited for structural shapes, solid bar, and tubing. It is appropriate for both production runs and intermittent shop cutting tasks where a single blade must handle varied stock.

Key Features

• Bi-metal construction with M42 High Speed Steel teeth bonded to a spring steel back for durability and flex resistance
• Variable 4 to 6 TPI pitch with Vari-Raker tooth set reduces vibration and improves cut quality across varied stock profiles
• Positive rake angle promotes aggressive, efficient material removal on metals including stainless and tool steel
• 0.058 inch kerf width minimizes material loss per cut
• 150 inch welded loop length fits common 12 ft 6 in band saw wheel configurations
• LENOX Classic series — factory-welded and tensioned, ready to install without field joining

Compatibility

Designed for stationary band saws with a 12 ft 6 in blade capacity and a 0.75 inch blade width specification. Verify wheel size, blade guide spacing, and blade width rating on the saw before installation.

Installation Notes

Band saw blade replacement should be performed by a qualified technician following the saw manufacturer's service procedure. Disconnect and lock out electrical power to the saw before opening any blade guards or wheel covers. Wear cut-resistant gloves when handling the coiled blade, as the teeth present a laceration hazard during uncoiling and threading. Confirm blade tension and tracking alignment before running the saw under load.