Lenox 47434CLB103302 Welded Bandsaw Blade 6-10 Tpi

Product Description

The LENOX 47434CLB103302 is a welded bi-metal bandsaw blade engineered for metal-cutting applications in industrial and commercial environments. The blade runs 130 inches (10 feet 10 inches) long, 1 inch wide, and 0.035 inches thick, with a variable pitch of 6 to 10 TPI that distributes cutting forces across the tooth pattern to reduce vibration and extend blade life. The tooth material is M42 high speed steel, a cobalt-enriched grade that retains hardness at elevated cutting temperatures. The spring steel back provides flexibility and fatigue resistance through continuous band operation. Licensed HVAC, plumbing, and mechanical contractors as well as metal fabricators rely on blades of this specification for demanding structural and alloy-steel cuts.

This blade is suited for cutting a wide range of metals on horizontal and vertical bandsaw machines sized to accept a 130-inch blade. Material applications include alloy steel, carbon steel, stainless steel, tool steel, structural steel, aluminum, and other non-ferrous metals. The variable pitch and Vari-Raker tooth set make it effective across varying cross-sections and wall thicknesses, from solid bar stock to tubing, reducing the need to swap blades between jobs. It is sold and packaged as a single blade.

Key Features

• M42 high speed steel teeth for extended cutting life in hard and abrasive metals
• Variable 6 to 10 TPI pitch reduces vibration and harmonics during the cut
• Vari-Raker tooth set improves chip evacuation and reduces tooth loading
• Spring steel back resists fatigue and flexion cracking through continuous band use
• 0.058-inch kerf width minimizes material loss per cut
• Cuts alloy steel, stainless steel, tool steel, aluminum, and non-ferrous metals

Compatibility

Designed for horizontal and vertical bandsaw machines that accept a 130-inch (10 feet 10 inches) blade with a 1-inch blade width capacity.

Installation Notes

Blade installation and tensioning should be performed by a qualified operator following the bandsaw manufacturer's guidelines. Power down and lock out the machine before mounting or removing the blade. Confirm wheel guides and blade guides are set to the correct width before operating. Do not exceed the maximum blade speed rating specified by the saw manufacturer for bi-metal blades.