Lenox 4061NEC3419 Band Saw Blade 14 Tpi 3/4 in 100 Ft

Product Description

The LENOX 4061NEC3419 is a carbon steel band saw blade in coil stock form, designed for cutting applications requiring a continuous supply of blade material. At 3/4 inch wide and 0.032 inch thick with a 14 teeth-per-inch (TPI) constant pitch, this coil delivers consistent cutting performance across a range of materials. The hard back construction maintains blade rigidity during operation, while the raker tooth set provides efficient chip clearance. The 100-foot coil length allows fabricators and maintenance shops to cut blades to custom lengths, reducing waste and accommodating multiple saw sizes from a single spool. Metal fabricators, pipefitters, and maintenance technicians are the primary installers.

This coil stock is suited for straight and contour cutting in production and maintenance environments where standard blade lengths are not practical. The 14 TPI constant pitch is appropriate for medium-thickness stock where a balance of cut speed and surface finish is needed. The toothed edge with straight tooth form and raker set handles a variety of ferrous and non-ferrous materials commonly encountered in trade and fabrication work. Shops that run multiple band saw models benefit from coil stock since blades can be welded or cut to fit specific wheel-to-wheel dimensions.

Key Features

• Carbon steel construction throughout the blade body
• 14 TPI constant pitch for consistent, predictable cutting
• Raker tooth set for efficient chip evacuation during cuts
• Hard back design resists flexing and maintains blade tracking
• Straight tooth form suitable for general-purpose contour and rip cuts
• 100-foot coil length allows on-site blade sizing to fit multiple saws

Compatibility

Designed as a general-purpose coil stock replacement for band saws accepting 3/4 inch wide blades. Blade segments can be cut and welded to the required wheel-to-wheel length for a specific saw. No specific compatible model numbers were provided in the product data.

Installation Notes

Blade cutting and welding from coil stock should be performed by a qualified technician using a blade welder appropriate for carbon steel. Ensure the band saw is fully de-energized and unplugged before removing an old blade or installing a new one. Follow the saw manufacturer's tensioning and tracking guidelines after installation. Proper blade set and tension are critical to blade life and cutting accuracy — do not exceed the blade speed ratings specified for the saw.