Lenox 4057NEC3419 Band Saw Blade Coil 6 Tpi 3/4 in 100 Ft

Product Description

The LENOX 4057NEC3419 is a band saw blade coil stock designed for continuous cutting operations where custom blade lengths are required. Made from carbon steel with a hard back construction, this coil delivers consistent performance in metal-cutting and general fabrication applications. The blade runs at 6 teeth per inch (TPI) with a constant pitch and raker tooth set, producing efficient chip clearance on a wide range of materials. At 3/4 inch wide and 0.032 inches thick, the profile suits standard band saw wheel and guide configurations. The 100-foot coil provides enough stock to cut and weld multiple blades from a single spool.

This coil stock is suited for shop environments where technicians and fabricators need to produce shop-welded blades in specific lengths for their machines. The straight tooth form and raker set make it a practical choice for contour cutting operations on ferrous and non-ferrous stock. Typical users include metal fabrication shops, HVAC fabricators, and maintenance facilities that run horizontal or vertical band saws requiring non-standard blade lengths. The constant pitch delivers predictable feed rates and surface finish across repetitive cuts.

Key Features

• Carbon steel construction with hard back for rigidity and resistance to blade flex during cuts
• 6 TPI constant pitch for balanced material removal and surface finish on general-purpose cutting
• Raker tooth set promotes efficient chip evacuation and reduces heat buildup
• Straight tooth form supports contour cutting capability
• 100-foot coil allows shop-welding to any required blade length
• 3/4 inch width and 0.032 inch thickness fit common band saw guide and wheel configurations

Compatibility

Designed as coil stock for shop-welded band saw blades on horizontal and vertical band saws that accept 3/4 inch wide blades with a 0.032 inch blade thickness.

Installation Notes

Band saw blade coil stock requires cutting to length and butt-welding using a blade welder before installation on the saw. Power down and de-energize the band saw fully before mounting any blade. Ensure blade guides, wheel tracking, and blade tension are set according to the saw manufacturer specifications after welding and installing the finished blade. Blade welding and dressing should be performed by qualified personnel familiar with band saw equipment.